Explore topic-wise fullforms in Current Affairs

INFO: Full form for TRIO is The Rebellion Is On in Governmental category
TRIO also has other full forms in other categories mentioned below.

INFO: Full form for TRIO is The Responsibility Is Ours in Governmental category
TRIO also has other full forms in other categories mentioned below.

INFO: Full form for TSSC is Transportation Safety Systems Center in Governmental category
TSSC also has other full forms in other categories mentioned below.

INFO: Full form for TCB is Telecommunications Certification Body in Governmental category
TCB also has other full forms in other categories mentioned below.

INFO: Full form for TCB is Tourism Council of Bhutan in Governmental category
TCB also has other full forms in other categories mentioned below.

INFO: Full form for VBD is Vulnerable Building Distance in Governmental category
VBD also has other full forms in other categories mentioned below.

INFO: Full form for TCB is Technical Cooperation Bureau in Governmental category
TCB also has other full forms in other categories mentioned below.

INFO: Full form for UIM is Unit Identification Marks in Governmental category
UIM also has other full forms in other categories mentioned below.

INFO: Full form for UIM is Under Insured Motorist in Governmental category
UIM also has other full forms in other categories mentioned below.

INFO: Full form for UAP is Underserviced Areas Program in Governmental category
UAP also has other full forms in other categories mentioned below.

INFO: Full form for UMV is Ultimate Mileage Vehicle in Governmental category
UMV also has other full forms in other categories mentioned below.

INFO: Full form for UMV is Uninsured Motor Vehicle in Governmental category
UMV also has other full forms in other categories mentioned below.

INFO: Full form for UDLC is Unified Development Land Code in Governmental category
UDLC also has other full forms in other categories mentioned below.

INFO: Full form for TRIC is The Revolution Is Coming in Governmental category
TRIC also has other full forms in other categories mentioned below.

INFO: Full form for TRIC is Three Rivers Interlocal Council in Governmental category
TRIC also has other full forms in other categories mentioned below.

INFO: Full form for UMV is Unidentified Male Voice in Governmental category
UMV also has other full forms in other categories mentioned below.

INFO: Full form for UMV is Un-manned Motor Vehicle in Governmental category
UMV also has other full forms in other categories mentioned below.

INFO: Full form for TSB is Timed Stink Bomb in Governmental category
TSB also has other full forms in other categories mentioned below.

The Transportation Safety Board of Canada (TSB, French: Bureau de la sécurité des transports du Canada, BST), officially the Canadian Transportation Accident Investigation and Safety Board (French: Bureau canadien d'enquête sur les accidents de transport et de la sécurité des transports) is the agency of the Government of Canada responsible for advancing transportation safety in Canada. It is accountable to Parliament directly through the President of the Queen’s Privy Council and the Minister of Intergovernmental and Northern Affairs and Internal Trade. The independent agency investigates accidents and makes safety recommendations in four modes of transportation: aviation, rail, marine and pipelines.

Transportation Safety Board may refer to:

INFO: Full form for TSSC is Taos Sustainable Systems Council in Governmental category
TSSC also has other full forms in other categories mentioned below.

INFO: Full form for ULM is Ultra Light Motorized in Governmental category
ULM also has other full forms in other categories mentioned below.

The Territorial Support Group (TSG) is a Met Operations unit of London's Metropolitan Police Service (MPS). Commonly referred to as "The Muscle of the Met", it specialises in public order policing, amongst other specialist areas. In 2012 it consisted of 793 officers and 29 support staff. The TSG is a uniformed unit of the MPS that replaced the similarly constituted Special Patrol Group in 1987. TSG units patrol the streets of London in marked police vans or "carriers"; using the call sign prefix "Uniform". Generally each carrier has an advanced (police) driver, seven constables and a sergeant. Territorial Support Groups often comprise three carriers, twenty one constables, and three sergeants reporting to an Inspector. They separately patrol designated areas experiencing serious levels of gang violence or disorder. When deployed, it is by the MPS Information Room. Due to the public order nature of their role often numerous carriers will be assigned. TSG officers can be identified as TSG from the distinctive "U" in their shoulder numbers. Some TSG officers are also plain clothes officers, carrying a taser and handcuffs.

INFO: Full form for TSG is Transportation Solutions Group in Governmental category
TSG also has other full forms in other categories mentioned below.

INFO: Full form for UDI is Unilateral Declaration Of Independence in Governmental category
UDI also has other full forms in other categories mentioned below.

The Unique Device Identification (UDI) System is intended to assign a unique identifier to medical devices within the United States, Europe, China, South Korea, Saudi Arabia and Taiwan. It was signed into law in the US on September 27, 2007, as part of the Food and Drug Administration Amendments Act of 2007. The EU acted to adopt UDI and on April 5, 2017, under the EU Medical Device Regulation (MDR) and In-vitro Diagnostic Regulation (IVDR), but adoption has been postponed to 2021; see Medical Device Regulation.

These harmonized pieces of legislation include language related to the establishment of a Unique Device Identification System. When implemented, the new system will require:

A national UDI system will create a common vocabulary for reporting and enhance electronic tracking abilities. Currently, analysis of adverse event reports is limited by the fact that the specific devices involved in an incident are often not known with the required degree of specificity. Without a common vocabulary for medical devices, meaningful analysis based on data from existing voluntary systems is problematic. Reliable and consistent identification of medical devices would enable safety surveillance so that the FDA and manufacturers could better identify potential problems or device defects, and improve patient care.

The UDI is expected to improve patient safety (in part by helping to identify counterfeit products and by improving the ability of staff to distinguish between devices that are similar in appearance but serve different functions), facilitate and improve the recall process, and create efficiences within the medical system.

In the most basic format, the UDI would be a coded number registered with standards organizations, and would incorporate a variety of information, including (but not limited to) the manufacturer of the device, expiry dates, the make and model of the device, and any special attributes that the device may possess. In a medical sense, "device" refers to any product that is not pharmaceutical in nature, and while the FDA have been given approval to exempt some devices, Jay Crowely (who was responsible for implementing the UDI requirements in the Act), has expressed an intent to apply the UDI to "everything until somebody gives us good reason not to", (excluding devices which won't need identification).

Following the passing of the Act, there were calls for the FDA to publish a timeline for the implementation of the UDI; this was subsequently done.

GUDID SubmissionThe Final Rule on Unique Device Identifiers also mandates medical device manufacturers to make a submission to the FDA's Global Unique Device Identification Database. The submission to the GUDID will include the Primary Device Identifier portion of the UDI as well as associated data attributes about each model or version number of the device.

Compliance with the submission component of UDI compliance is phased according to the Class of device. Class III device labelers must submit to the GUDID for all existing products by September 24, 2014. Labelers of Implantable, Life Supporting or Life Sustaining devices must submit to the GUDID by September 24, 2015. Class II labelers must comply with submission guidelines by September 24, 2016, and Class I labelers by September 24, 2018.

Submission to the GUDID may be made in one of two methods. The first method utilizes the FDA's GUDID Web Interface, which is meant for low volumes of GUDID submissions. The second method utilizes an HL7 SPL submission and is transmitted to the FDA through an Electronic Submission Gateway account.

Once the initial submission is made, labelers of medical devices must update the GUDID submission each time there is a change to the device attributes. While many device attributes may be updated once the device record is published within the GUDID, several attributes cannot be changed and will necessitate the labeler deactivate the existing submission and resubmit using a new Device Identifier.

INFO: Full form for UDI is Username Directorate of Immigration in Governmental category
UDI also has other full forms in other categories mentioned below.

INFO: Full form for TV is Travel Voucher in Governmental category
TV also has other full forms in other categories mentioned below.

Thrust vectoring, also known as thrust vector control (TVC), is the ability of an aircraft, rocket, or other vehicle to manipulate the direction of the thrust from its engine(s) or motor(s) to control the attitude or angular velocity of the vehicle.

In rocketry and ballistic missiles that fly outside the atmosphere, aerodynamic control surfaces are ineffective, so thrust vectoring is the primary means of attitude control. Exhaust vanes and gimbaled engines were used in the 1930s by RobertGoddard.

For aircraft, the method was originally envisaged to provide upward vertical thrust as a means to give aircraft vertical (VTOL) or short (STOL) takeoff and landing ability. Subsequently, it was realized that using vectored thrust in combat situations enabled aircraft to perform various maneuvers not available to conventional-engined planes. To perform turns, aircraft that use no thrust vectoring must rely on aerodynamic control surfaces only, such as ailerons or elevator; aircraft with vectoring must still use control surfaces, but to a lesser extent.

In missile literature originating from Russian sources, thrust vectoring is often referred to as gas-dynamic steering or gas-dynamic control.

Thunder Valley is the sixteenth novel in World of Adventure series by Gary Paulsen. It was published on December 1, 1997 by Random House.

INFO: Full form for TML is Traffic Management Laboratory in Governmental category
TML also has other full forms in other categories mentioned below.

INFO: Full form for TML is Television Microwave Link in Governmental category
TML also has other full forms in other categories mentioned below.