Explore topic-wise InterviewSolutions in Technology.

INFO: Full form for BITE is Biometric Identification Technology Ethics in Technology category
BITE also has other full forms in other categories mentioned below.

INFO: Full form for BHTS is Bechtel Hydrocarbon Technology Solutions in Technology category
BHTS also has other full forms in other categories mentioned below.

INFO: Full form for PVT is Power Video Transmitter in Technology category
PVT also has other full forms in other categories mentioned below.

Injection moulding (U.S. spelling: injection molding) is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals (for which the process is called die-casting), glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated barrel, mixed (using a helical screw), and injected into a mould cavity, where it cools and hardens to the configuration of the cavity.: 240 After a product is designed, usually by an industrial designer or an engineer, moulds are made by a mould-maker (or toolmaker) from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection moulding is widely used for manufacturing a variety of parts, from the smallest components to entire body panels of cars. Advances in 3D printing technology, using photopolymers that do not melt during the injection moulding of some lower-temperature thermoplastics, can be used for some simple injection moulds.

Injection moulding uses a special-purpose machine that has three parts: the injection unit, the mould and the clamp. Parts to be injection-moulded must be very carefully designed to facilitate the moulding process; the material used for the part, the desired shape and features of the part, the material of the mould, and the properties of the moulding machine must all be taken into account. The versatility of injection moulding is facilitated by this breadth of design considerations and possibilities.

INFO: Full form for IM is Intensity Modulation in Technology category
IM also has other full forms in other categories mentioned below.

INFO: Full form for MTM is Ministry Technology Mentor in Technology category
MTM also has other full forms in other categories mentioned below.

Santa Monica Airport (IATA: SMO, ICAO: KSMO, FAA LID: SMO) (Santa Monica Municipal Airport) is a general aviation airport largely in Santa Monica, California, United States. The airport is about 2 miles (3 km) from the Pacific Ocean (Santa Monica Bay) and 6 miles (10 km) north of Los Angeles International Airport. The FAA's National Plan of Integrated Airport Systems for 2009–2013 categorized it as a reliever airport. The airport is scheduled to remain open until 2028. Santa Monica Airport covers a total of 215 acres (87 ha) of land.

One of the airport's former hangars, the Barker Hangar, is in use as a public events venue, and is commonly used for a number of televised awards ceremonies and concerts. It is also currently being used as a small-scale supermarket set for the current version of Supermarket Sweep.

INFO: Full form for ITM is Information Technology Manager in Technology category
ITM also has other full forms in other categories mentioned below.

Surface-mount technology (SMT) is a method in which the electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical component mounted in this manner is referred to as a surface-mount device (SMD). In industry, this approach has largely replaced the through-hole technology construction method of fitting components, in large part because SMT allows for increased manufacturing automation which reduces cost and improves quality. It also allows for more components to fit on a given area of substrate. Both technologies can be used on the same board, with the through-hole technology often used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

INFO: Full form for TMC is Technology and Maintenance Council in Technology category
TMC also has other full forms in other categories mentioned below.

INFO: Full form for QFT is Quick Fuel Technology in Technology category
QFT also has other full forms in other categories mentioned below.

INFO: Full form for RCX is Robotic Command eXplorer in Technology category
RCX also has other full forms in other categories mentioned below.

INFO: Full form for LLT is Language Learning Technology in Technology category
LLT also has other full forms in other categories mentioned below.

INFO: Full form for LLTA is Lake Lanier Technology Alliance in Technology category
LLTA also has other full forms in other categories mentioned below.

INFO: Full form for MRTP is Maui Research and Technology Park in Technology category
MRTP also has other full forms in other categories mentioned below.

INFO: Full form for OLTC is Open Learning Technology Corporation in Technology category
OLTC also has other full forms in other categories mentioned below.

Sound recording and reproduction is an electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.

Acoustic analog recording is achieved by a microphone diaphragm that senses changes in atmospheric pressure caused by acoustic sound waves and records them as a mechanical representation of the sound waves on a medium such as a phonograph record (in which a stylus cuts grooves on a record). In magnetic tape recording, the sound waves vibrate the microphone diaphragm and are converted into a varying electric current, which is then converted to a varying magnetic field by an electromagnet, which makes a representation of the sound as magnetized areas on a plastic tape with a magnetic coating on it. Analog sound reproduction is the reverse process, with a bigger loudspeaker diaphragm causing changes to atmospheric pressure to form acoustic sound waves.

Digital recording and reproduction converts the analog sound signal picked up by the microphone to a digital form by the process of sampling. This lets the audio data be stored and transmitted by a wider variety of media. Digital recording stores audio as a series of binary numbers (zeros and ones) representing samples of the amplitude of the audio signal at equal time intervals, at a sample rate high enough to convey all sounds capable of being heard. A digital audio signal must be reconverted to analog form during playback before it is amplified and connected to a loudspeaker to produce sound.

Prior to the development of sound recording, there were mechanical systems, such as wind-up music boxes and, later, player pianos, for encoding and reproducing instrumental music.

INFO: Full form for ASET is Application Specific Engine Technology in Technology category
ASET also has other full forms in other categories mentioned below.

The Government Information Awareness (GIA) project was an initiative of the MIT Media Lab, designed "to provide American citizens with digital tools for participating in the democratic process."

The GIA initiative was inspired by the Total Information Awareness project of the US government's Information Awareness Office, and was predicated on the premise that citizens have a right to maintain information on the government - similar to what information the government maintains on the citizens.

INFO: Full form for PGT is Pan Gulf Technology in Technology category
PGT also has other full forms in other categories mentioned below.

INFO: Full form for Sonogram is from Latin sonus (sound) + gram (written character, that which is drawn) in Technology category
Sonogram also has other full forms in other categories mentioned below.

INFO: Full form for CT is Constant Temperature in Technology category
CT also has other full forms in other categories mentioned below.

A compliant tower (CT) is a fixed rig structure normally used for the offshore production of oil or gas. The rig consists of narrow, flexible (compliant) towers and a piled foundation supporting a conventional deck for drilling and production operations. Compliant towers are designed to sustain significant lateral deflections and forces, and are typically used in water depths ranging from 1,500 to 3,000 feet (450 to 900 m). These structures are considered freestanding but media supported (by water). They demonstrates static stability but have a much greater degree of lateral deformation/flexibility vs land-base structures, up to 2.5% vs 0.5% and are partially supported by buoyancy. It is unknown if these structures could support themselves as built if they were constructed on land. At present the deepest is the Chevron Petronius tower located in water 623m deep.

With the use of flex elements such as flex legs or axial tubes, resonance is reduced and wave forces are de-amplified. This type of rig structure can be configured to adapt to existing fabrication and installation equipment. Compared with floating systems, such as tension-leg platforms and SPARs, the production risers are conventional and are subjected to less structural demands and flexing. However, because of cost, it becomes uneconomical to build compliant towers in depths greater than 1,000 meters. In such a case a floating production system is more appropriate, even with the increased cost of risers and mooring. Despite its flexibility, the compliant tower system is strong enough to withstand hurricane conditions.

The first tower emerged in the early 1980s with the installation of Exxon's Lena oil platform.